Difference between revisions of "Simcity 2000 Special Edition"

From XentaxWiki
Jump to: navigation, search
(XTER: Completed filling in XTER data.)
(Additional notes on segment types:: Adding XBLD data. To be completed.)
Line 266: Line 266:
  
 
[[File:Xterspecial.png]]
 
[[File:Xterspecial.png]]
 +
 +
=== XBLD ===
 +
Like XTER; each square is assigned one "code byte". This section is also compressed. In general, simply changing a value will result in an inconsistent simulation: buildings here are subject to the simulation and may not be permanent, or may have unintended consequences on other parts of the simulation.
 +
 +
{| class="wikitable"
 +
! Byte(s)
 +
! Result
 +
|-
 +
|00
 +
|Clear/empty
 +
|-
 +
|01-04
 +
|Rubble
 +
|-
 +
|05
 +
|Radioactive waste
 +
|-
 +
|06-0C
 +
|Trees, in increasing density
 +
|-
 +
|0D
 +
|Small park (set XZON for 1x1 building)
 +
|}
  
 
=== Other ===
 
=== Other ===

Revision as of 03:24, 14 May 2016

Back to index | Edit this page

IDX + DAT


Format Specifications

// for each file

uint32 {4}   - ID
uint32 {4}   - File Offset


MultiEx BMS Script

Not written yet

Notes and Comments

  • The *.idx file contains the directory, the *.dat file contains the file data



Compatible Programs


SC2

Format Specifications

// HEADER

char {4} - Chunk Type ID ('FORM')
int32 {4} - Total count of bytes in file minus first 8 in the header
char {4} - File type (always 'SCDH' for SimCity 2000)

// Begin segments/nested chunks. For each nested chunk:

// Segment header

char {4} - Segment type
int32 {4} - Byte count of the data in this segment (excluding this header)

// Segment data, begin sub-segment bytes (let x = the byte's value)

byte {1}
// If 1 <= x <= 127:
byte {x} - Raw, uncompressed data
// If 129 <= x <= 255:
byte {1} - The following byte repeats x-127 times.
// Repeat for the rest of this segment's data length.

Notes and Comments

  • This is the file format in which cities are stored. See the IFF page on Wikipedia (linked above) for more information on the format, although it is essentially a generic container file format.
  • All of this information is thanks to the research done by David Moews, with a document here.
  • After the header, the rest of the file is made up of chunks containing an 8 byte header followed by its data. Almost all segment data is compressed using a run-length algorithm. Specifically:
    • The compressed data is a series of two kinds of chunks
    • In the first kind, the first byte equates to an integer 1 to 127. This means the byte is counting how many data bytes follow.
    • In the second kind, the first byte equates to an integer 129 to 255. If you subtract 127 from it, you end up with a count of how many times the following byte is repeated.
    • Chunks with a first byte of 0 or 128 never seem to occur.
    • Therefor, the maximum size of an uncompressed sub-chunk can be 127 bytes.

Segment Types

  • The following table is a list of segment types in the order they typically appear. Unless noted, they are compressed using the above algorithm. The lengths given are their compressed lengths.
Seg. type Length (bytes)
CNAM 32 (Uncompressed)
MISC 4800
ALTM 32768 (Uncompressed)
XTER 16384
XBLD 16384
XZON 16384
XUND 16384
XTXT 16384
XLAB 6400
XMIC 1200
XTHG 480
XBIT 16384
XTRF 4096
XPLT 4096
XVAL 4096
XCRM 4096
XPLC 1024
XFIR 1024
XPOP 1024
XROG 1024
XGRP 3328

Additional notes on segment types:

MISC

Contains miscellaneous statistics. These are represented as 1200 4-byte integers, noted here as #0 through #1199. The values are stored big-endian. Here are the known values:

ID Description
2 Rotation (??)
3 Founding year of the city
4 Days elapsed since founding. Every month is 25 days.
5 Money
20 SimNation population (in 1,000's)
124-379 Number of squares with a given tile type (i.e, XBLD; from 00 to FF)
439 Neighboring city 1 population
443 Neighboring city 2 population
447 Neighboring city 3 population
451 Neighboring city 4 population

ALTM

Altitude map, which is uncompressed. Each "square" is two bytes, with them being scanned in top to bottom, and from right to left in each row. In my testing, this seems to mean that the first square is at the northern-most corner of the screen. Following that, squares proceed to the south-west, or left in this case. Let every two bytes represent a 16 bit integer, MSB first, such that bits 4-0 represent the altitude from 50 to 3150 feet. Taking the bit to an integer, multiply it by 100 then add 50 to get the altitude in feet. Bits 6-5 are unknown. Bit 7 seems to be set if a square is covered by water. Bits 15-8 are unknown.

Bit(s) Purpose
15-8 Unknown
7-5 Something to do with water coverage, see below
4-0 Altitude, see above

Notes from my own testing (in SCURK 1.0): It seems that the default altitude of a square (starting in SCURK) is 4 "units" high, represented by a binary 00100 which equals 450 feet. Raise that square by one, and it will become decimal 5, or binary 00101. At some point along a row of empty level squares, hex 0x0084 squares show up in groups of 22 bytes, or 11 squares. This is bin 10000100, which is still the usual four squares high, although bit 7 is set despite the square not being under water.

Furthermore, in a totally unmodified city (with only the name/year/budget having been set), the first eight bytes of ALTM data (or four squares) have this hex 0x0084 pattern, followed by 20 bytes (10 squares) with the hex 0x0004 pattern. Eight more bytes follow that with hex 0x0084, and the alternation continues although the number of squares in each set does not seem to correlate with anything. Upon generating another city with a different name, but with all other parameters the same, the alternating pattern is also exactly the same. Starting with hex 84 then hex 4 and repeating, the number of squares is: 4, 10, 4, 13, 3, 3, 31, 25, 8, 27, 3, 11, ... Bit 7 apparently does not seem to indicate water coverage, although it could indicate that water was on this tile at one time. Raising terrain as in the previous example does appear to disturb this pattern, with squares of hex 4 becoming more abundant. Adding a pond of water to a square sets bits 7 and 6. Interestingly, bulldozing the pond, or changing the elevation of the square (which visually removes the pond) does not unset those bits, despite the pond apparently being gone. Further testing conducted in SC2000 Win 95 version: Lowering the tile but adding the pond back leaves only bit 7 set, unsetting bits 6 and 5 if they were set. Raising it once again and adding the pond sets bit 5.

Ultimately, it seems clear that bits 7 thru 5 have something to do with water. What exactly that is remains unclear; perhaps it was supposed to be used in a feature that was never implemented.

XTER

This determines if there is land or water in the square, and how it slopes. Each square is represented by one "code" byte (keep in mind that the data here is compressed). For basic slope information, refer to the following graphic:

Xtercodes.png

Note that bytes 0E and 0F are considered unknown/unused and may produce unexpected results.

Byte(s) Result
00-0D Dry land, possibility of an incline.
0E-0F Unused?
10-1D Slopes like the 0x set, although the tile is submerged in water.
1E-1F Unused?
20-2D Partially submerged
2E-2F Unused?
30-3D Not submerged, but may have water on top via placement by the water tool.
3E Waterfall
3F Unused?
40-41 Surf/canals, running either up/down or left/right.
42-45 Surf/bays, one opening which is surrounded by land.
46-54 Unused/gaping hole in the ground
55-FF Unused?

Xterspecial.png

XBLD

Like XTER; each square is assigned one "code byte". This section is also compressed. In general, simply changing a value will result in an inconsistent simulation: buildings here are subject to the simulation and may not be permanent, or may have unintended consequences on other parts of the simulation.

Byte(s) Result
00 Clear/empty
01-04 Rubble
05 Radioactive waste
06-0C Trees, in increasing density
0D Small park (set XZON for 1x1 building)

Other

ID Comments
CNAM The name of the city, uncompressed, and also optional it seems. When it's present, the length byte is a number 0 to 31, with that many bytes of city name. It's padded to 32 bytes with zeroes.

Navigation

Jump to a listing by...
All Formats - Common Formats - Standard Formats - Malformed Pages
Platforms
Microsoft:
Xbox
Xbox 360
Nintendo:
GameCube
DS
Desktop:
PC
Sega:
Dreamcast
Sony:
PlayStation
PlayStation 2
PlayStation 3
PlayStation Portable
Type
Animation - Archive - Audio - Image - Mesh - Miscellaneous - Model - Video
Endianness
Little-endian - Big-endian
BMS Scripts
Pages Without a BMS Script

All Pages with Scripts:
Recently Added Scripts

Program Support
No Known Support

MultiEx Commander - Game Extractor

Format Specification Completion
Work in Progress - Almost Done - Completed
Compression and Encryption
No Compression or Encryption Used - Unknown Compression or Encryption Used

One or Both Used:
Compression Used - Both Compression and Encryption Used